Eupry Smart Instruments · For pharma manufacturing

Calibration in seconds for the FMS you already have

Add a non-disruptive upgrade of your facility monitoring with Eupry's Smart Instruments and Swap-to-Calibrate process.

  • Points go back in service in seconds
  • Keep your cabling, PLC, SCADA, and historian
  • Instruments arrive pre-calibrated and traceable
Eupry sensor probe near pharmaceutical tanks, with "Calibration in seconds" badge and compliance certification logos.

Trusted by 1,000+ GxP companies worldwide

  • Novo Nordisk logo featuring a dark blue bull with a circular emblem and company name in bold blue text
  • AstraZeneca logo with purple wordmark and gold abstract arrow symbol on white background
  • Agilent Technologies logo with blue starburst dot pattern icon and dark navy company name text
  • Dechra pharmaceutical company logo featuring a bold dark blue stylized letter D and company name in navy text
  • ScieGen Pharmaceuticals Inc. logo with blue globe icon and company name in dark blue text
  • WuXi Biologics logo with blue, green, and yellow diagonal stripes and tagline Global Solution Provider
Portable dry block calibrator with digital display and handheld reader on a steel table in a lab setting.

In-situ calibration

A time-consuming and disruptive process,

  • Isolate the loop and take the point out of service
  • Carry reference equipment to the point and work through
  • Adjust, document and return the point to service
  • An estimated hour or more per instrument, every interval
Eupry temperature sensor probe with connector pin, labeled "~2 seconds per point" measurement speed.

With Swap-to-Calibrate

  • Fresh calibrated instruments are delivered to you every cycle
  • Put in service mode, swap the sensor, and put back in service
  • Send the removed instrument back for as-found calibration (optional service)

From hours to seconds per point

Reference equipment

None needed on site

Out of service

Seconds per point

The certificate

Arrives digitally with the instrument

Disruptions

Minimal
Fits your infrastructure

Same cable and same PLC

Choose the connection that matches each area of your site. In every case the instruments report to your PLC, and no Eupry server is installed on site.

  • Existing 4-wire cable: The cable lands on the same terminals and the 24 V feed stays. A digital module replaces the analog input channel, and a function block writes into the same tags.
  • Existing 2-wire cable: Power and data on one pair. A line master in the cabinet signals by voltage level within 5–24 V, the instrument answers with current steps, and the PLC sees the same interface.
  • Ethernet: For new builds and areas with OT networking to the field. MQTT recovers buffered data natively, and a wide range of protocols such as OPC UA is supported. OPC UA | MQTT | Modbus | Profinet | EtherNet/IP
Our customers

What our customers say

4.8
Average rating
176+
Reviews
"Eupry has revolutionized the way we monitor our laboratory temperatures."
Albert Britton
Royal BAM Group
"Easy to use system, excellent reaction time of support department"
Birgit Sinnhuber
LAFUWA Ing. Büro für Umwelttechnik, Beratung und Analytik GmbH
"Ease of use and level of data available"
Ben Hoyle
NHS
"exceedingly satisfied, starting from guidance during quotation process to delivery, very pleasant contact and great support!"
Inge Seibold
SGS
"Their professional and knowledgeable team members are a pleasure to work with."
Jordan Hardy
Frontier Scientific Solutions
"Amazing service"
Michael Cardone
Eurofins Scientific HQ - Ebersberg (Germany)
"Easy system to use, great support"
Anette Fritzon
Baxter International Inc.
"An excellent product plus always fast and professional support"
Joakim Sund
DSV - Global Transport and Logistics
"Excellent customer service and flexibility"
Anonymous
AGC Biologics
"Quality and delivery time. Your willingness to listen and adjust to our needs"
Anonymous
Novo Nordisk
"The premise, the structure, and the commitment to improve the technology is the most impressive aspects to me."
Anonymous
FedEx
"Eupry has revolutionized the way we monitor our laboratory temperatures."
Albert Britton
Royal BAM Group
"Easy to use system, excellent reaction time of support department"
Birgit Sinnhuber
LAFUWA Ing. Büro für Umwelttechnik, Beratung und Analytik GmbH
"Ease of use and level of data available"
Ben Hoyle
NHS
"exceedingly satisfied, starting from guidance during quotation process to delivery, very pleasant contact and great support!"
Inge Seibold
SGS
"Their professional and knowledgeable team members are a pleasure to work with."
Jordan Hardy
Frontier Scientific Solutions
"Amazing service"
Michael Cardone
Eurofins Scientific HQ - Ebersberg (Germany)
"Easy system to use, great support"
Anette Fritzon
Baxter International Inc.
"An excellent product plus always fast and professional support"
Joakim Sund
DSV - Global Transport and Logistics
"Excellent customer service and flexibility"
Anonymous
AGC Biologics
"Quality and delivery time. Your willingness to listen and adjust to our needs"
Anonymous
Novo Nordisk
"The premise, the structure, and the commitment to improve the technology is the most impressive aspects to me."
Anonymous
FedEx
"Eupry has revolutionized the way we monitor our laboratory temperatures."
Albert Britton
Royal BAM Group
"Easy to use system, excellent reaction time of support department"
Birgit Sinnhuber
LAFUWA Ing. Büro für Umwelttechnik, Beratung und Analytik GmbH
"Ease of use and level of data available"
Ben Hoyle
NHS
"exceedingly satisfied, starting from guidance during quotation process to delivery, very pleasant contact and great support!"
Inge Seibold
SGS
"Their professional and knowledgeable team members are a pleasure to work with."
Jordan Hardy
Frontier Scientific Solutions
"Amazing service"
Michael Cardone
Eurofins Scientific HQ - Ebersberg (Germany)
"Easy system to use, great support"
Anette Fritzon
Baxter International Inc.
"An excellent product plus always fast and professional support"
Joakim Sund
DSV - Global Transport and Logistics
"Excellent customer service and flexibility"
Anonymous
AGC Biologics
"Quality and delivery time. Your willingness to listen and adjust to our needs"
Anonymous
Novo Nordisk
"The premise, the structure, and the commitment to improve the technology is the most impressive aspects to me."
Anonymous
FedEx
The problem

Calibration in situ costs hours (and headaches)

Every 4–20 mA loop is calibrated where it hangs. The transmitter, the PLC input channel and the scaling form one measuring system, so they are calibrated together, in place.

  • Time-consuming

    Every sensor has to be checked with a reference instrument, taking around an hour or more per point.

  • Disruptive

    The sensors need to be taken out of service while they are calibrated, which interrupts your production.

  • Manual

    The certificate is written up after the work is done, and matching it to measurements is done by hand.

The solution

A saving that repeats every cycle

With Eupry's Swap-to-Calibrate proces, you receive newly calibrated sensors every cycle – ready to swap in seconds.

  • Arrives calibrated (no reference need)

    Sensors are pre-calibrated in our ISO/IEC 17025 accredited lab and arrive to you ready to swap.

  • Swapped on site (without disruptions)

    Points are swapped direcly on-site and are out of service for only seconds – not hours.

  • Digital calibration (with a click)

    The serial number travels with every measurement, and a digital certificate is tied to the number.

  • Your system stays (no new cabling)

    Keep your cabling, PLC, SCADA and historian. HMI screens and alarms keep working.

Diagram comparing on-site calibration (~1 hour downtime) to Eupry's pre-calibrated swap with no production impact.
Eupry product catalog pages fanned out beside two white Wi-Fi data logger devices with decorative patternsCatalog

Download a product catalog

Get instant access to all the details and see how it works our catalog.

Initializing ...
  • Data stays in OT: No Eupry server on site and no OT-to-cloud link. Certificates are fetched on the enterprise IT side.
  • Recovery after an outage: Instruments buffer locally, up to 3 million measurements on the top version. The PLC reads them back.
  • Your PLC platform: Siemens S7-1500 is the reference design. Rockwell, ABB and Emerson DeltaV are confirmed in scoping.

Eupry Smart Instrument

Eupry temperature and humidity sensor.

One serial number and certificate sent with every measurement.

  • Calibrated in an accredited lab before it ships
  • Works with your existing cabling, PLC and SCADA
  • Swapped in service mode
Eupry temperature sensor device on dark blue background with ISO, FDA, and compliance certification logos below.
Traceable by design

Calibrate the instrument, and the chain is calibrated

PLC, SCADA and historian transport and store the value, but they do not form it.

The serial number, recorded as a historian tag, links every value to its ISO/IEC 17025 certificate.

Your historian stays the record of truth.

Eupry dashboard on tablet and mobile showing temperature monitoring graphs, alarms, logbook, and ISO/FDA compliance badges
Getting started

Start with one panel

Five-step process diagram: Scoping, Bench validation, Pilot point, Qualification, and Roll-out, with brief descriptions.

Let Eupry FMS run monitoring and calibration

Replacing your FMS instead?

Eupry FMS brings monitoring, calibration and certificates into one validated system, with the same Swap-to-Calibrate method.

  • Eupry FMS Cloud · full functionality on Eupry's validated cloud application
  • Eupry FMS On-prem · installed and validated in your own landscape
Download a product catalog
How the solution ensures cold room compliance

All your compliance boxes?

Consider them ticked!

At Eupry, compliance is at the forefront of everything we do. We keep up with every regulatory turn to keep the solution – and you – a step ahead.

  • GDP & GMP monitoring standards
  • ISO 17025 accredited calibration
  • FDA 21 CFR Part 11 module for records/signatures
  • ISO 9001-certified quality
  • ISO 27001‑certified data security
  • IQ/OQ Qualification protocol
Six compliance certification logos: ISO 9001, ISO 17025, ISO 27001, ILAC-MRA, WHO, and FDA 21 CFR Part 11 on a teal background.
Certifications and accreditations

The Eupry Trust Hub

All compliance documentation in one place

Vetting a new GMP partner involves a lot of questions. Our Trust Hub is designed to make that process faster and easier. It gathers all the information you need to assess our compliance and processes – from accreditations, certifications, and quality management approach to how we handle data security.

Screenshot of Eupry Trust Hub dashboard showing compliance certifications, ISO badges, documents, and quality management sections.
Frequently asked questions

FAQ

Does the PLC need to do any scaling?

No, and it must not. The instrument delivers values in engineering units. If the PLC or SCADA applies a conversion, that calculation becomes part of the measuring chain and has to be verified during OQ.

What happens to the data during an exchange?

The point goes into service mode first, exactly as it does for in-situ calibration today. Alarms are suppressed by design and the data is flagged. Communication loss during the exchange is expected and is not raised as a process alarm.

What if the PLC restarts or the link drops?

Each instrument buffers its own measurements locally. On polled protocols such as Modbus, the function block reads back buffered samples by timestamp and sequence number until the historian is up to date. On OPC UA and MQTT Sparkplug B, the historian or broker recovers the data natively.

How do we know which certificate belongs to which measurement?

The instrument sends its serial number with its measurements. Record that as a historian tag, logged on change, and a join on timestamp shows which instrument, and therefore which certificate, produced every value.

What happens if an as-found calibration comes back out of tolerance?

We provide the full as-found data, and the impact assessment follows your own deviation procedure. As-found calibration is an optional service, and whether you need it is a QA decision.

Does anything connect from our OT network to Eupry?

No. No Eupry server is installed on site and there is no OT-to-cloud connection. Certificates are retrieved on the enterprise IT side, over outbound HTTPS from your CMMS.

Can firmware be updated remotely?

Over-the-air updates can be disabled, or the OT variant can be supplied without update capability. Firmware is refreshed through the regular instrument exchange instead.

Who does the PLC and SCADA work?

Usually your automation team or your system integrator. We supply the function blocks, the register map, reference wiring, and the IQ/OQ test scripts.

Do we have to buy the instruments?

Instruments are delivered as a service and exchanged per agreement, typically yearly, so the hardware and firmware stay current over the life of the facility without a separate spare-parts programme.

Three Eupry team members in circular profile photos: a young woman, an older man, and a younger man

Send us a message

Need a quote or more information? We are here to help. Let us know what you are looking for, and we will get back to you as soon as possible.

Initializing ...

Learn more

See how Eupry Smart Instruments turn calibration into a swap.